 |
Reporter Intercoms:
Very affordable prices, EXCELLENT battery life, and reliable wireless operation are some of the admirable features of our new Reporter and Oracle intercom systems.
See All Products »
|
|
|
|
Shop > X-10 Pro > LM14A
|
2-Way Lamp Module with Soft Start
|
|
|
|
 Enlarge Image
|
This product has been discontinued.
Plug-in, incadescent dimmer with "soft start/resume dim" and two way communications for feedback to the CM11A computer interface.
This is a two-way version of the traditional X10 lamp module. This module has a "soft-start" feature. When an X10 signal is sent, the module will fade the lamp up from the off setting. Traditional lamp modules have always come on at full bright. The fade up and down takes about two seconds. The second new feature is that the new module remembers it's last dimmed setting.
|
|
|
|
|
|
|
INSTALLATION AND OPERATING INSTRUCTIONS
1. Set the black Unit Code dial on the front of the Module to the desired
number between 1 and 16.
2. Set the red Housecode dial to the same letter as your X-10 PRO
Controllers or the same letter as used with your 2-Way Computer
Interface (CK11A) and ActiveHome software.
3. Make sure the lamp (incandescent only) you want to control is turned on,
and unplug it from its outlet.
4. Plug the lamp into the module.
5. Plug the module into the AC outlet.
To turn the module on/off, press the number corresponding to its Unit Code
on any X-10 Controller (i.e. PHC01), then press ON/OFF.
Note: the PLM21 is a 2-Way module so you can poll it (ask it for its status) from
the 2-Way Computer Interface and ActiveHome software. ActiveHome will
ask the PLM21 for its status and the module will report back to indicate
whether it is on or off. The ActiveHome software will then update the graphics
on your computer monitor screen to show the status of the module. See your
owner's manual for the ActiveHome system for more information.
X-10 PRO LIMITED 2-YEAR WARRANTY
X-10 PRO warrants X-10 PRO products to be free from defective material
and workmanship for a period of two (2) years from the original date of
purchase at retail. X-10 PRO agrees to repair or replace, at it’s sole
discretion, a defective X-10 PRO product if returned within the warranty
period and with proof of purchase. If service is required under this warranty
please return your defective product to the dealer you purchased it from.
|
|
|
|
|
|
|
|
|
The Smartest DIY Home Improvements
