1/3HP, 15A, for control of small fans, radios etc. Does not have intensity control. Does not respond to "All Lights On". Available only in white. Plug-in module. Two Way capabilities for feedback to the CM11A Computer interface and other status tracking home controllers.
Item # PAM21
The PAM21 Appliance Module is designed to control loads with the following ratings:
Resistive load: 15A
Motor load: 1/3 HP
Incandescent load: 500W
TV/Stereo: 400W
The module is available in two plug formats: two-pin (PAM21) and three-pin grounded (PAM22).
Setting up the Appliance Module
Set the Unit Code dial to an unused code which can be controlled from the Security Remote (switches 1-4 control Unit Codes 1-4) or any other desired X10 controller.
Plug an appliance into the Appliance Module and plug the Appliance Module into a convenient AC outlet.
Local control
The Appliance Module Includes circuitry to sense the appliances own on/offswitch to turn the appliance on locally. To switch the appliance on, turn the appliance's switch off then on again.
The Smartest DIY Home Improvements
