 |
OWN A WEBSITE?
EARN CA$H!
Become our Partner and Start Earning Money Today!
Join SmartHomeUSA's Official Affiliate Program
Simply register your website's domain with us and earn a percentage of every sale you send our way!
|
|
|
|
Shop > X-10 Pro > PEX02
|
Powermid IR Extender Transmitter
|
|
|
|
 Enlarge Image
|
The Powermid IR Extender (PEX01) allows multi-room control of A/V devices. The Transmitter (PEX02) converts IR signals from your existing remote to RF. The Receiver (PEX03) converts the signals back to IR. An IR Extender cord (RX569) can be used to better locate the Receiver. Transmitters, Receivers and Extender cords can be ordered separately.
|
|
|
|
|
|
|
The POWERMID infrared remote control extender allows you to use any existing remote control units to operate VCR, Stereo, CD player or satellite systems from anywhere in the home. The complete POWERMID system consists of a transmitter (PEXO2) and a receiver (PEXO3). Additional transmitters may be added to extend remote control to each room required. Additional receivers may be added to control additional equipment in other rooms.
Setting up the Powermid
- Position the transmitter (PEXO2) in the room where the remote control will be operated such that the remote can be pointed at the transmitter without obstruction.
- Position the receiver (PEX03) so that the face with the logo on it is pointing towards the audio-visual components to be controlled. Fully extend the antenna.
Note: If it is not practical to position the receiver in this way, an optional IR extender cab/e is available.
Testing the Powermid
|
- Ensure that the TV/VCR/cable box to be controlled is switched on and can be controlled locally using the manufacturer's remote.
- In the room where the transmitter (PEXO2) is installed, check for correct operation of the POWER function on each component to be controlled (TV/VCR/cable box etc.) using the appropriate remote.
|
|
|
|
|
|
|
|
|
|
|
The Smartest DIY Home Improvements
