Smart Home Systems

smart The Smartest DIY Home Improvements

house  Home Automation, Security & Energy Savings
         
 Phone Orders: 1-888-843-9103 | 631-361-3600
                                  
 
smart
Search
 
Shop

New UPB Products
Easily put the Smart into your Home

UPB Switches:
The most reliable, customizable, and easy-to-install Power Line Automation switches ever made. ZERO New Wires Required!
UPB Only $79.95
View All Switches ยป


  Shop > X-10 Pro > PHC02
x10
  X10 PRO MaxiController
 
X10 PRO MaxiController
Enlarge Image
Plug-in controller controls up to 16 individual X-10 addresses. "Group" feature allows simultaneous control of multiple addresses. Black with smoked plastic cover.

Introduction
The X1O PRO Maxi Controller lets you remotely control lights and appliances from anywhere in your home. You can keep it by the bedside and turn off the TV without getting out of bed. You can turn off your child's radio or night light from your bedroom.
Item # PHC02
$18.95  
Low Prices Guaranteed!
Free Technical Support
Shipping Rates
Availability:
Item is Available
Display All:
X-10 Pro
Overview More Info Photos x10
You can turn on ALL lights connected to Lamp Modules and Wall Switch Modules with the push of a button if you hear a suspicious noise at night. You can even turn off everything in the system with one button to save energy How many times have you gone to bed and left the downstairs light on because you didn't want to get out of bed to turn it off? Now you don't have to.

Keeping in mind that your X1O PRO Maxi Controller will always turn lamps and appliances on or off the instant you press the buttons. That's obvious - but there can be some unexpected consequences if not used with care. For example, an empty coffee pot can be remotely turn on. If that should happen, your coffee pot may be damaged from overheating. If an electric heater is turned on by remote control while clothing is draped over it, a fire could result. Do not use the system for the control of high power heating appliances such as portable heaters.

The X1O PRO Maxi Controller activates lights and appliances throughout your home from any convenient location. The Maxi Controller transmits signals to the Modules over your existing house wiring. You plug lamps into Lamp Modules, plug appliances into Appliance Modules and replace wall light switches with Wall Switch Modules. You can then control virtually everything electrical in your home. You can also dim and brighten lamps.

How it works
The Maxi Controller tells the Modules what to do. Command signals are sent over your existing house wiring to the Module or Modules of your choice, The Modules respond to the command signals. The tamp Module turns on and off, dims and brightens any incandescent lamp up to 300 watts. The Appliances Module turns on and off appliances such as a TV (not "instant on" TVs), window fan or stereo. It can also be used for a lamp but cannot dim it. The Wall Switch Module turns on and off, dims and brightens and incandescent light up to 500 watts, which is normally operated by a wall switch.

Setting up the Maxi Controller
  1. To install your Maxi controller, simply plug the power cord into any functioning 120V outlet.
  2. Using a small screwdriver, choose one the 16 letters on the Maxi Controllers Housecode dial. All X1O Modules have a similar red Housecode dial. Set the Maxi Controller and all the Module, to be controlled by it to the same Housecode letter.
Having 16 choices for the Housecode enables you to setup several independent systems in one home without interaction among them. Also, you can avoid interference with, or from, a neighbor's system by choosing a different Housecode letter.

Install and set up the Modules (sold separately)
  1. Install and set up all of your X1O Modules referring to the instructions included with them. Be sure to turn off the power at the circuit breaker panel when installing Wall Switch Modules
  2. Set all of your Modules to the same Housecode as you set on the Maxi Controller.
  3. Set each Module to a Unit Code between 1 and 16.
To Control a light or appliance
Press and release the number button corresponding to the Unit Code set on the Module to be controlled, followed by a function button - ON, OFF, Bright, Dim, All Lights On, or All Lights Off. The "All Lights On" key does not affect Appliance Modules.

The Finder Label is a convenient place to indicate the locations of lights and appliances controller by your system. There is one box for each unit key.

Problem Solving
If a particular Module won't go on or off from the buttons on the Maxi Controller:

Check that you have power to the outlet controlling the Module and the switch on the light or appliance is ON. Check that the Unit Code on the Module is set to the correct number. Check that the Housecode on the Module is set correctly. The Housecode on the Module and the Maxi Controller must be set to the same letter.

Try plugging the Module and the Maxi Controller into the same outlet. If the Module doesn't work in ANY outlet, not even with the Module and the Maxi Controller in the same duplex receptacle (top and bottom) the Module may be damaged or faulty.

If you can't control ANY Modules from the Maxi Controller Check that you have power to the outlet for the Maxi Controller Check that the Housecode on the Maxi Controller is set correctly,

Try plugging the Module and the Maxi Controller into the same outlet. If NONE of your Modules work in ANY outlet, not even with the Module and the Maxi Controller in the same duplex receptacle (top and bottom) the Maxi Controller may be damaged or faulty.

INTERCOM SYSTEMS
Intercom systems which send voice signals over existing electrical wiring may interfere with the operation of the Maxi Controller when the intercom is in use, If the Intercom system has it's own separate wiring it will not cause a problem.

POWER INTERRUPTIONS
When the power is restored after an outage, Lamp Modules and Wall Switch Modules will normally be OFF? Appliance Modules will stay as they were before the interruption.

MANUAL CONTROL
Lights and appliance connected to plug-in Modules can be turned ON with their own power switch, Simply turn the switch OFF then ON again once or twice, For lamps with three-way bulbs, you will have to rotate the power switch up to 4 times before the light comes on.

The Wall Switch Module can be turned ON or OFF locally using it's push button. The power On-Off switch on the Wall Switch Module is used to completely turn off the power For example, when changing a light bulb.
Return to Top
Contact Us |  Link To Us |  Copyright © 1997 - 2008 Smart Home Systems, Inc. All rights reserved |  Sitemap