 |
OWN A WEBSITE?
EARN CA$H!
Become our Partner and Start Earning Money Today!
Join SmartHomeUSA's Official Affiliate Program
Simply register your website's domain with us and earn a percentage of every sale you send our way!
|
|
|
|
Shop > X-10 Pro > PLM01
|
X10 PRO Lamp Module (with Automatic Gain Control)
|
|
|
|
 Enlarge Image
|
Plug-in, incandescent dimmer with Automatic Gain Control. Responds to "All Lights On." Rated at 300 watts.
The AGC Lamp Module incorporates an advanced X10 powerline circuit design which allows the module to operate in adverse environments. The principal advantages are greater sensitvity and better noise rejection.
|
|
|
|
|
|
|
These modules are recommended for larger installations, installations where noise generating equipment such as electric motors etc. are operated nearby and where reliability of operation is paramount.
The AGC Lamp Module is designed to control incandescent loads with a rating of between 40W and 300W. Lamps rated below 40W may flicker or operate erratically.
Note: Lamp Modules must not be used to control appliances or fluorescent lamps.
 |
Setting up the Lamp Module to use with an X10 PRO Security System
- Set the House Code dial to match the Security Consoles house code. This code is downloaded by the monitoring station. The default House Code is A.
- For normal lighting control, set the Unit Code dial to an unused code which can be controlled from the Security Remote (switches 1-4 control Unit Codes 1-4) or any other desired controller.
- To use as the security light, set the Unit Code to the match the Unit Code of the security light downloaded by the monitoring station. The default security light Unit Code is 13.
Note: The security light is the Iight which
is flashed on/off during an alarm and which Is
controlled by the security LIGHT ON and LIGHT OFF
buttons on the console, keychain and security
remotes.
- Plug a lamp into the Lamp Module and plug the
Lamp Module into a convenient AC outlet,
preferably an unswitched one to ensure that the
lamp will always operate when the alarm is
triggered.
|
Local control
The Lamp Module includes circuitry to sense The lamp's own on/off switch to turn the lamp on locally.
To switch a lamp on, turn the lamp's own switch off then on again
|
|
|
|
|
|
|
|
|
|
|
The Smartest DIY Home Improvements
