 |
OWN A WEBSITE?
EARN CA$H!
Become our Partner and Start Earning Money Today!
Join SmartHomeUSA's Official Affiliate Program
Simply register your website's domain with us and earn a percentage of every sale you send our way!
|
|
|
|
Shop > X-10 Pro > PLM02
|
X10 PRO Screw-in Lamp Module
|
|
|
|
 Enlarge Image
|
The PLM02 is on Backorder with X-10. The PSM04 is a non-dimming 150 Watt module.
The replacement product is the PSM04
Screw-in, incandescent dimmer rated for outdoor use. Respond to "All Lights On." Rated at 150 watts.
The Screw Fitting Lamp Module is designed to control incandescent loads with a rating of between 40W and 150W. Lamps rated below 40W may flicker or operate erratically.
|
|
|
|
|
|
|
Note: Lamp Modules must not be used to Control appliances or fluorescent lamps.
Setting up the Lamp Module to use with an X-1O Pro Security System
|
- Set the House Code dial to match The Security Consoles house code. This code is downloaded by the monitoring station. The default House Code is A.
- For normal lighting control, set The Unit Code dial to an unused code which can be controlled from U~. Security Remote (switches 1-4 control Unit Codes 1-4) or any other desired controller.
- To use as the security light, set the Unit Code to the match the Unit Code of the security light downloaded by the monitoring station. The default security light Unit Code is 13.
Note: The security light is the light which is flashed on/off during an alarm and which is controlled by
the SECURITY LIGHT ON and LIGHT OFF buttons on the console, keychain and security remotes).
- Plug a lamp into the Lamp Module and plug the Lamp Module Into a convenient AC outlet, preferably an unswitched one to ensure that the lamp will always operate when the alarm is triggered.
Local control
The Lamp Module Includes circuitry to sense the lamp's own on/oft switch to turn the lamp on locally.
To switch a lamp on, turn the lamp's own switch off then on again.
|
|
|
|
|
|
|
|
|
|
|
The Smartest DIY Home Improvements
