 |
Are you the type to
Do It Yourself?
Just Launched!
DIY Home Automation
Designed for you, the do-it-yourself home owner interested in learning about the benefits of home automation, at your own pace!
DIYHomeAutomation.com
|
|
|
|
Shop > X-10 Pro > PLM03
|
X10 PRO Lamp Module (without Automatic Gain Control)
|
|
|
|
 Enlarge Image
|
Plug-in, incandescent dimmer without Automatic Gain Control. Responds to "All Lights On." Rated at 300 watts.
The PLM03 Lamp Module is designed to control incandescent loads with a rating of between 40W and 300W. Lamps rated below 40W may flicker or operate erratically.
|
|
|
|
|
|
|
Note: Lamp Modules must not be used to control appliances or fluorescent lamps.
 |
Setting up the Lamp Module to use with an X10 PRO Security System
- Set the House Code dial to match the Security Consoles house code. This code is downloaded by the monitoring station. The default House Code is A.
- For normal lighting control, set the Unit Code dial to an unused code which can be controlled from the Security Remote (switches 1-4 control Unit Codes 1-4) or any other desired controller.
- To use as the security light, set the Unit Code to the match the Unit Code of the security light downloaded by the monitoring station. The default security light Unit Code is 13.
Note: The security light is the Iight which
is flashed on/off during an alarm and which Is
controlled by the security LIGHT ON and LIGHT OFF
buttons on the console, keychain and security
remotes.
- Plug a lamp into the Lamp Module and plug the
Lamp Module into a convenient AC outlet,
preferably an unswitched one to ensure that the
lamp will always operate when the alarm is
triggered.
|
Local control
The Lamp Module includes circuitry to sense The lamp's own on/off switch to turn the lamp on locally.
To switch a lamp on, turn the lamp's own switch off then on again
|
|
|
|
|
|
|
|
|
|
|
The Smartest DIY Home Improvements
