 |
Are you the type to
Do It Yourself?
Just Launched!
DIY Home Automation
Designed for you, the do-it-yourself home owner interested in learning about the benefits of home automation, at your own pace!
DIYHomeAutomation.com
|
|
|
|
Shop > X-10 Pro > PMS01
|
X10 PRO PIR Wireless Motion Detector
|
|
|
|
 Enlarge Image
|
Sends RF transmission to main console of X-10 PRO Security Systems. Built in sensitivity switch for single or double catch mode. Comes with mounting bracket. Requires 4 AA batteries.
|
|
|
|
|
|
|
| Specifications |
| Power Supply | 6v (4 x AA) |
| Battery Run Time | One Year |
| Output | 1mV |
| RF Frequency | 310 Mhz |
| RF Range | 100 feet |
| 65,536 unique codes |
|
|
Installing the Motion Detector
|
- Attach the Motion Detector to a wall at a height of 5 to 6ft using the mounting bracket and screws provided.
provided.
Note: The Motion Detector has a special lens that looks downwards. It must therefore be mounted to face outwards horizontally i.e. do not 'aim' the sensor downwards.
- Set the slider switch to position 1 for instant triggering for maximum sensitivity or position 2 to trigger only after two movements have been sensed.
Registering the Motion Detector with the Security Console
|
- Fit four AA Alkaline batteries in the battery compartment,
- Press the CODE button using a pencil or other pointed object to generate a new security code.
- Set the slider switch on The Security Console to INSTALL.
- Press the TEST button on the Motion Detector. The console beeps once to confirm and the next available zone LED lights.
Note: If the Motion Detector senses movement before you press the TEST button it may register itself automatically.
Testing the Motion Detector
|
- Set the slider switch on the Motion Detector to position 1
- Press and hold the TEST button for about a second. The LED flashes twice when you release it.
- Wait 20 seconds for the sensor to settle.
- Walk in front of The Motion Detector The indicator LED lights each time it senses movement. Check the coverage area and reposition the sensor as required.
- Press the TEST button to return to normal operating mode.
Note: The Motion Detector will automatically return to normal operating mode after about 2 minutes.
|
|
|
|
|
|
|
|
|
The Smartest DIY Home Improvements
