 |
Easily put the Smart into your Home
UPB Switches:
The most reliable, customizable, and easy-to-install Power Line Automation switches ever made. ZERO New Wires Required!
|
Only $79.95
|
View All Switches ยป
|
|
|
|
Shop > Lighting, Appliance & Home Automation Controls > X-10 Remotely Located Controllers > PSR01
|
X10 Remote Control for X10 PRO Security Systems a.k.a. SH624
|
|
|
|
 Enlarge Image
|
Features Arm in the "Home" or "Away" mode, "Panic" button, "Delay" entry options, "Security Light" remote control and remote operation of 4 other X10 PRO controlled devices.
Registering the Security Remote with the Security Console
- Set the codewheel on the Security Remote to the same house code as the Security System. Note: The house code for the Security System is downloaded by the security monitoring station. The default is A.
|
|
|
|
|
|
|
|
- Fit four AAA Alkaline batteries in the battery compartment in the back of the remote.
- Set the slider switch on the Security Console to INSTALL.
- Press ARM. The console beeps once to confirm that the keychain has been registered.
- Return the console slider switch to the RUNI or RUN2 position.
Note: If the remote did not register, remove the label on the front and use a pencil or other pointed object to press the small CODE button to generate a new random code. Press ARM again to install the remote.
Testing the Security Remote
|
- Set the slider switch on the security console to RUN1 or RUN2.
- Press ARM AWAY on the remote, The console beeps once to confirm and the ARM indicator lights.
- Press SECURITY LIGHT ON and OFF to control a light connected to a lamp module with codewheels set to A1 3 (or other code downloaded by the security monitoring station).
|
|
|
|
|
|
|
|
|
|
The Smartest DIY Home Improvements
