 |
SAFE SHOPPING FOR ALL!
SmartHomeUSA now utilizes McAfee Secure technology (previously HackerSafe) to ensure all your transaction information is SAFE & SECURE within our checkout system.
Click on the logo above to verify our system's compliance with McAfee Secure.
|
|
|
|
Shop > Video Surveillance Systems > Digital Video Recorders > Channel Vision DVRs and Accessories > 29185DKIT
|
Xantech Shelf-Top LCD/CFL IR Receiver Kit
|
|
|
|
 Enlarge Image
|
The Hidden Link Shelf-Top IR Receiver Kit will allow you to hide your AV components in another room for a clean looking installation. It consists of a small shelf-top infrared repeater assembly, a connecting block, a power supply and four visible designer emitters. The Hidden Link IR Receiver is equipped with a 7-foot cable and a 3.5mm stereo mini plug, which is plugged directly into the "AUX" or "IR RCVR" jack of the 791-44 Connecting Block. The Hidden Link IR Receiver is primarily intended for use in installations where the connecting block is within reach of its 7-foot cable – as when installing the Hidden Link IR Receiver in a cabinet where the controlled equipment is behind closed doors.
Features:
- Designed to work with LCD displays and CFL lights - Place on shelf-top or cabinet near TV
- IR modulation frequency bandwidth: 30 - 60 kHz
- Adjustable IR carrier frequency: 32 to 56 kHz (allows matching to actual component for optimum performance)
- Nominal reception range: > 40 feet
- Compact package, 3 1/4" x 1" x 2" (83mm x 26mm x 51mm)
Includes:
- (1) 291-85D Shelf-Top
- (1) 789-44 Connecting Block
- (1) 781ERGPS Power Supply
- (4) 283D Visible Designer Emitters
|
|
|
|
|
|
|
29185D Receiver:
- Infrared carrier input frequency bandwidth: 30 - 60kHz
- Reception range: Up to 50 feet, depending on conditions
- Nominal reception angle: 55 degrees off axis
- Cable requirements: See “INSTALLATION” below
- Max. transmission length: 1 mile using 18 gauge wire
- Maximum current output: 100mA
- Drives IR emitters through Xantech Connecting Blocks, Controllers, etc
- Dimensions: 2.00”x3.15”x0.70” (51mm x 80mm x 18mm)
- Power requirements: +12VDC, 20mA
789-44 Connecting Block:
- Inputs: 1 - Screw type 4-terminal plug-in. 1 - IR Receiver "IR RCVR" 3.5mm stereo mini jack
- Outputs: 4 - Emitter ports (3.5mm mono mini jacks) parallel driven
- Contains a 470 Ohm resistor in series with each emitter output
- Xantech 282, 283, 284 & 286 Mini Emitters may be used
- Power requirements: 12 volts DC. Uses 781RG or 782-00 Power Supplies. Note: A power supply is not
connected to the 789-44 when it is used as an emitter expander
- 2.1 mm coaxial power jack
- Dimensions: 2-15/16" W x 1-3/4" D x 13/16" H
|
|
|
|
|
|
|
|
|
The Smartest DIY Home Improvements
