The Smartest DIY Home Improvements

Home Automation, Security & Energy Savings

Phone Orders: 1-888-843-9103 | 631-361-3600

What is Home Automation?

Find out!
Home Automation Defined

Shop > Multi-Room Video > Channel Vision Technology > GRI-2600

Water Sensor Normally Closed for a Closed Loop Circuit 12 Volts DC

Undetected water damage such as that caused by leaking pipes or corroded water heaters can cost homeowners tens of thousands of dollars each year. Such repairs are time consuming and costly to correct. Applications could include computer room sub-floor areas, telephone equipment rooms, bathrooms, laundry rooms, any areas adjacent to a water storage tank or piping. Also evaporative air conditioners, drip pans, overflows and/or drains.

Features:

Will detect any conductive non-flammable liquid
Ideal anywhere water damage could occur
Automatic Reset
Available in gray only
6 foot jacketed lead standard

Item # GRI-2600

$17.95

Shipping Rates
Free Technical Support
Low Prices Guaranteed!

Availability:

Item is Available

Display All:

GRI

Using no mechanical parts, the GRI Water Sensors are triggered by a moisture bridge across the sensor contacts. The GRI Water Sensors can be installed to detect a layer of water as minute as 1/16 of an inch in depth.

This 2600 Closed Loop Sensor uses an external power source to energize a built-in relay contact so battery power is not recommended. Used in a closed loop configuration, an alarm condition will occur when moisture is detected, or if power to the sensor is lost, and if the sensor should fail. The relay output can be wired directly to any alarm panel or can be used to actuate an external device, i.e. transmitter, annunciator, etc.