Need Help?

WattStopper Isolé® Plug Load Control 8 Receptacle Surge Suppressor with Occupancy Sensor

Item # IDP-3050A

This product has been discontinued.

Click here to see the replacement product, BG108000-04

This item weighs 2.00lbs.

View all WattStopper products

Product Description

The Isolé IDP-3050 is an energy saving control system that provides maximum surge and noise suppression while keeping plugged-in equipment off when there is no occupancy. It consists of an eight outlet power strip and a personal occupancy sensor. The surge suppressor has a 5 year warranty.

Plug loads account for an increasing percentage of the total energy consumed by buildings — up to 15% in homes and 9% in commercial buildings. According to the EPA, "energy consumption by office equipment represents the fastest growing use of electricity in the country."

How It Works:

The Isolé IDP-3050 consists of an eight-outlet power strip with surge protection and a personal occupancy sensor that utilizes the latest passive infrared (PIR) technology. When the sensor detects occupancy, it turns on controlled outlets. When the space becomes vacant, the sensor turns off these outlets automatically after the preset time delay expires.

How Much Can You Save?

A single workspace can consume 1,500 kWh each year with an average cost of $175 (and growing)! Add up the cost of every workspace and the amount is staggering. Isolé can dramatically cut this cost with energy savings of up to 50%.


Power Strip Features:
  • Eight outlets - six controlled, two uncontrolled
  • Surge and noise suppression protects desktop equipment
  • Ground protected for safety; will not operate without a grounded outlet
  • Two LEDs to indicate: 1) correct wiring and grounding; 2) surge protection is functioning
  • Installation requires no hardwiring
  • Flat offset plug for wire management
  • One uncontrolled outlet and one controlled outlet are wall-transformer-enabled
  • Plugs into a standard three-prong outlet
Personal Sensor Features:
  • Uses latest passive infrared (PIR) technology to detect occupancy
  • User-adjustable time delay of 30 seconds to 30 minutes
  • Multilevel Fresnel lens for superior occupancy detection
  • 120° coverage up to 300 square feet
  • ASIC technology reduces components and enhances reliability
  • Instantaneous response time


Power Strip:
  • Electrical rating: 120VAC, 12A, 50/60 Hz
  • 12A dry contact relay
  • Six-foot black cord
  • Transformer provides power to sensor
  • Mounts with screws or doubl-sided tape
  • UL 1449 rating; 400V
  • Circuit: High-energy, multistage hybrid
  • Noise filtration 0-25db (94.38%)
  • Joule rating: 740 joules
  • Maximum surge amperage: 48,000 Amps
  • Protection modes: 400V L-N, 400V L-G, 400V N-G
  • Response time: instantaneous
  • Let-through voltage: 140V
  • Initial clamping voltage: 200V
  • UL and CUL listed; five-year warranty
Personal Sensor:
  • Nine-foot connector cable
  • Supply voltage: 12 VDC
  • UL and CUL listed; five-year warranty

Manuals for WattStopper

No products are currently available from this category.
Unavailable/discontinued items are listed below for your reference.
Back to Top

Interested in Home Automation, but don't know where to start?

Choosing a Home Automation System: A guide for Do-It-Yourselfers

Start Here

Plan Your Systems

Structured Wiring Systems

Complete Structured Wiring Systems from Leviton and ChannelVision Central.

Free E-Book: Home Automation Basics

Learn More