Be alerted to damaging water leaks to protect what's valuable to you! The WaterBug provides reliable protection to effectively detect water and will send an alert signal to notify you of a problem. For proper operation, the WaterBug must be used in conjunction with an alarm system, wireless transmitter, etc. (it's compatible with almost any security or home automation system). Installation is easy: just mount the control console on a wall or other flat vertical surface and the remote probes are placed in the locations where water leakage is most probable. Several consoles may be wired together to monitor an entire complex.
Features:
Versatile 12 or 24 Volt AC/DC power for operation (power supply sold separately)
No false alarms due to condensation or humidity
Can monitor up to 6 sensor probes - up to 100 feet away
Provides (1) form "C" contact closure output for alarm
Easy surface mount installation
One year parts and labor (subject to conditions of limited warranty)
Item # WB-200
The WB-200 operates on 12 or 24 Volt AC/DC and has a form C relay output that can be connected to alarm panels, bells, dialers, etc. The unit can monitor up to as many as six sensor probes, up to 100 feet away. Each sensor probe has two contacts. When a film of water forms a bridge between these contacts, the unit senses this and triggers the alarm output. The sensor will not alarm due to condensation or high humidity. One standard surface sensor is included with the unit.
The Smartest DIY Home Improvements
