Dakota Alert 2500 Wireless Motion Detection Kit is a feature-filled wireless motion detector/receiver kit designed to help you prepare for unexpected visitors.
The motion detecting sensor can detect a person or vehicle up to 50 feet away. When motion is detected, the sensor sends a signal back to the receiver, which then alerts you by sounding the alarm.
The receiver plays one of four different tunes that are selected at the transmitter so that different zones can be distinguished. The receiver also offers a 5 minute exit delay so you can leave the house without disturbing any occupants. It also has a reminder beep and counter function.
This kit can be used by homeowners and business owners as a driveway alarm, entrance alert, backyard monitor, etc. Installation is very simple and only take a few minutes.
The motion detecting sensor operates on one 9-volt battery (not included). The receiver is powered by a 12VDC transformer. The receiver has four form "C" relay outputs and one 12 VDC output. Its antenna is built-in (no external antenna required). The output durations are adjustable up to 10 minutes.
* Actual range will vary depending on the local terrain.
- High: more than 50 feet
- Medium: 20-50 feet
- Low: less than 20 feet
- ON: LED will flash when it detects
- OFF: LED is always dark
- ON: set for outdoor use
- OFF: set for indoor use
- 10 seconds to reset after activation
- 120 seconds to reset after activation
- Frequency: 433.92 MHz
- Operating range: -30° F to 110° F
- Battery life: 6-12 months