Categories

Categories

Additional Information

Additional Information

Account Navigation

Account Navigation

Currency - All prices are in AUD

Currency - All prices are in AUD
 Loading... Please wait...
SmartHomeUSA

Categories

Categories

Optex Twin Beam Photoelectric Detectors - AX-70TN

$90.72

Optex Twin Beam Photoelectric Detectors - AX-70TN

$90.72
SKU:
OP-AX-70TN
Weight:
2.30 LBS
Shipping:
Calculated at checkout
Quantity:
Share

Product Description

Overview

Outdoor 70 foot range. Indoor 165 foot range.

Product Description

  • Rain, Fog and Snow Protection
    • Automatic Gain Control (AGC) circuit continually monitors gradual changes in signal strength caused by weather
    • conditions and adjusts the trigger level accordingly, to maintain proper sensitivity.
    • Signal Wave of Beam Output 
      ax-70tgrid.jpg
  • Protection Against Birds, Insects and Falling Leaves]
    • Twin beams require simultaneous interruption to trigger an alarm. No alarm is generated when only one beam is blocked by a small object.
    • Beam interruption time can be adjusted according to the peculiarities of each installation site. When protecting a wall or fence, a long interruption time will catch intruders, but let jumping cats pass through. This allows you to increase stability, while maintaining reliability at every installation site.
  • Frost, Dust and Insect Protection
    • Anti-Frost design incorporates special slots on the cover allowing beam passage even when the cover is completely frosted over. The OPTEX casing design also reduces condensation and water built-up, while sealed optics proved greater protection against dust and insects. 
      ax-70td.jpg
  • Easy Installation and Alignment
    • View Finder provides rough alignment, while voltage meter jacks allow fine tuning. Powerful twin beams are sharply defined and will attain the optimum signal strength easily.
    • The pole mount brackets supplied will allow installation of two units on a pole at the same height.

Dimensions:
ax-70Tdimen.jpg

Features

  • Compact design, indoor/outdoor use
  • Reliably withstands as much as 99% loss of beam energy
  • Two synchronized beams of pulsed infrared energy
  • Maximum arrival distance is 10 times longer than rated operating distance

Featured on MythBusters
(Episode 54: Crimes and Myth-Demeanors 1)
on The Discovery Channel

Specifications

 

Optex Twin Beam Photoelectric Detectors 

Specifications
Model AX-70T AX-130T
Detection Method Infrared Photoelectric
Range Outdoor 70ft. (21m) 
Indoor 165ft. (50m)
Outdoor 130ft. (40m) 
Indoor 330ft. (100m)
Maximum Arrival Distance 700ft. (210m) 1,300ft. (400m)
Beam Characteristics 1,000pps. 8,800A pulsed infrared
Interruption Period 50 to 500msec (variable)
Power Input 10 ~ 30VDC
Current Draw 30mA max (10 ~ 30VDC) 39mA max (10 ~ 30VDC)
Indicator Transmitter-Green LED On in transmitting condition. 
Receiver-Red LED On in alarm condition.
Alarm Period 2 sec (±1) nominal
Alarm Output N.C. 28VDC, 0.2A max
Tamper Switch Opens when cover is removed.
Operating Temperature -13°F to 131°F (-25°C to 55°C)
Environment Humidity 95% Max.
Alignment Angle ± 5° Vertical, ± 90° Horizontal
Mounting Wall or Pole
Dimensions inches (mm) 6.57"/H x 2.64"/W x 2.58"/D (167/H x 67/W x 66.5/D)
Weight 24.3oz (690g)
Standard Accessories Screws (0.6" x 3/4" self tapping) x 4 Pole mount kit
*Specifications and design are subject to change without prior notice. 

NOTE: This unit is designed to detect movement and activate an alarm control panel. Being only part of a complete alarm system, we cannot assume responsibility for theft or damages, should it occur.

Manual

Product Reviews