Turn any plug-in appliance with capabilities to control it with a remote control
Turn any plug-in appliance (up to 1875W, 15A) into a remote controlled device with the Aeon Labs Aeotec Z-Wave Smart Energy Plug-In Appliance Switch, G2. The switch plugs into a standard power outlet, and your appliance plugs into the switch. Installation is that simple. Now you can use a Z-Wave controller to turn the appliance on/off from 100 feet away.
- Reports wattage consumption or kWh energy usage
- Controllable by other Z-Wave devices
- Remotely turn connected device ON/OFF to save electricity
- Operating distance of 100+ feet
- Small size to help minimize blocking of other AC outlets
Built-In Energy Meter
Monitor and track wattage consumption or kWh energy usage over time of a specific appliance with the Smart Switch Z-Wave Appliance Module from Aeotec. Plug a home appliance directly into this second edition Z-Wave Appliance Module and then connect it directly to an AC outlet to start receiving energy readings. The Smart Switch can be controlled by other Z-Wave devices allowing for it to be remotely turned ON/OFF and set to a schedule helping to further save electricity when suitable. It has a communicating range of 100+ feet and its small size helps to reduce the risk of potentially blocking additional power outlets.
Second Generation Enhancements
As part of Aeon Labs' Generation 2 series, the G2 Z-Wave Plug-In Appliance Switch is smaller and more reliable than the original model. The switch receives wireless Z-Wave commands up to 100 feet away, repeats Z-Wave commands to other devices, and supports Z-Wave Explorer Frames.
- Power Input: 90-260VAC, 50/60Hz
- Max. Output: 1875W, 15A
- Optimized Antenna Range: 100+ feet tested (30 meters)