Linear Card Reader Interface for AMP3PLUS is an interface for swipe card readers or other wiegand devices
The AM-CRI Card Reader Interface is designed for use with Linear’s access control systems. To use AM-SR swipe card readers or a variety of other Wiegand devices in a Linear access control system, this Card Reader Interface is required.
It will support up to two 26 or 31-bit Wiegand input devices from any manufacturer, permitting easy interconnection of card readers, proximity readers, or other devices that use the industry standard. If the readers used have a hold or buffer connection, two readers may be used to the AM-CRI. If the readers do not have a hold or buffer connection, one reader may be used with the AM-CRI.
The Card Reader Interface mounts near the readers and connects to the system controller through a six-wire cable. Power is supplied to the interface and the reader or readers from the controller or an external source for locally powered readers.
- For equipping a Linear access control system with one or two Wiegand devices
- Card Reader Interface can be used with up to two 26 or 31-Bit Wiegand input devices
- Power is supplied by system controller or external source for locally powered readers
- 4.45" W x 5.75" H x 1.5" D