The Simply Automated SimplySmart UPB Lamp Starter Kit includes two (2) lamp modules and one (1) tabletop 4-button controller with scene control. Modules support lighting loads of 1W minimum to 900W maximum, including CFL and LED fixtures.
The lamp modules have been programmed from the factory to turn on at 100%. If you would like a different lighting level when the lamp is off, press and hold button 1, 2 or 3 until the desired lamp dim level(s) is (are) achieved, then release. If you are using compact fluorescent or fluorescent lighting, you should not attempt to change the dimming level. Fluorescent lighting cannot be dimmed, can only be turned on at a 100% dim level.
Each button on the Tabletop Controller with 4-Buttons controls a SCENE that can easily be edited from the factory pre-sets.