X10 Dimmer Switch enable rote control for your dimmable wired lighting fixture.
The switch controls dimmable incandescent lights up to 500 Watts. It responds to ON/OFF, BRIGHTEN/DIM, and ALL LIGHTS ON remote X10 commands, as well as local ON/OFF and BRIGHTEN/DIM control.
- Controls incandescents up to 500 Watts
- Works in single-pole or multi-way applications
- Includes white and ivory rocker paddles
- No Neutral wire required
You can use the X10 Dimmer Switch to control the connected light locally the same way you would use a traditional dimmer switch. Press and hold the top of the rocker to BRIGHTEN, or hold the bottom to DIM.
The X10 Dimmer Switch can be used in single-pole applications, or 3- or 4-way applications (requires companion switch, sold separately). The Dimmer Switch takes approximately 3 seconds to adjust lights from Off to Full Bright and vice versa. A power cutoff switch is located directly below the rocker switch for safe bulb changing.
- Dimmer Switch
- White Paddle
- Ivory Paddle
NOTE: Wallplate not included.
- Power: 120VAC, 60Hz
- Max. Resistive Load: 500 Watts Incandescent; Supports Incandescent loads with rating between 40W and 500W.
- Approvals: UL, CSA