X10 Duplex Receptacle Module (Both Outlets Controlled) can remotely control two plug-in appliances.
When you plug an appliance into the X10 Duplex Receptacle Module (Both Outlets Controlled), you can turn it on/off remotely with an X10 controller. This heavy-duty receptacle supports two plug-in appliances up to 20A each. You can also automate an external load or downline receptacle by wiring it to the module's Blue Switched Leg Wire.
- Both outlets respond to on/off X10 commands
- Supports two plug-in appliances
- Installs in a single-gang box
When an appliance is plugged into the X10 Duplex Receptacle Module, you can still turn it on/off with its local switch. The module senses if any load is plugged into it, so when the switch is local toggled, the modules knows to respond.
- X10 Duplex Receptacle
- Mounting Hardware
NOTE: Wallplate not included.
- Number of Controlled Outlets: 2
- Minimum Load: 40W
- Maximum Current: 20 Amps
- Operating Voltage: 110-120 VAC
- Dimensions: 2-3/4(H) x 1-3/4(W) x 1-1/2(D) inches (4-1/8 inch height including mounting tabs)
- Warranty: 2 Years Limited