X10 PRO Wired-In Inductive Fixture Module provides X10 control inside a wired fixture.
You can enable X10 remote control inside a wired fixture with the X10 PRO Wired-In Inductive Fixture Module. Designed to control incandescent lighting fixtures or inductive loads, the module is compact enough to fit inside a single-gang box, a recessed lighting can, etc. This XPFM module is similar to the XPDF in-line fixture module, except this one supports inductive loads and does not support dimming.
- Controls a hard-wired fixture up to 15A
- Mounts in the fixture or a J box
- Responds to ON/OFF and ALL ON/OFF commands
NOTE: The module can only be used in fixtures where 60-degree C wiring is permitted.
- Power Requirements: 120 VAC, 60 Hz
- Power Rating: 1800W, 15 Amps max.
- X10 Control: On/Off, All On/Off Capable
- Dimmable: No
- Max. Operating Temperature: 140° F (60° C)
- Dimensions: 2.94(L) x 2.06(W) x 1.3(D) inches